UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20225
                        
                            Issued:1982-12-15
                    
                            Revised:2019-11-07
                    
                            Style
                            20225
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200, 250 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PFA
		
			dia of cable under jacket
		
			0.425 inches or less15 mils minimum average thickness12 mils minimum thicness at any point
		
			0.426-0.700 dia20 avg16 min
		
			0.701-1.500 dia30 avg24 min
		
			1.501-2.500 dia45 avg36 min
		
			2.501 dia and larger60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.  In addition, the tag may also indicate the following:
			2500 V peak - For Electronic Use Only.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20225	Issued:1982-12-15
			Revised:2019-11-07


Rating	200, 250 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded PFA
	dia of cable under jacket
	0.425 inches or less	15 mils minimum average thickness	12 mils minimum thicness at any point
	0.426-0.700 dia	20 avg	16 min
	0.701-1.500 dia	30 avg	24 min
	1.501-2.500 dia	45 avg	36 min
	2.501 dia and larger	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: 2500 V peak - For Electronic Use Only.