UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20231
                        
                            Issued:1983-07-07
                    
                            Revised:2023-02-28
                    
                            Style
                            20231
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C, voltage not assigned, Cable Flame, Optional - 80 deg C Oil Resistant.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure. The designations of all style wires used in making the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together.  All insulated conductors in any group twisted together. If more than one group is used, groups shall also be twisted together.  The length of lay of the twisted insulated conductors or groups is not specified. Optional fillers may be provided.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of insulated conductors.
		
			ShieldOptional.
		
			JacketExtruded FEP.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less25 mils20 mils
		
			0.426 - 0.700 inch30 mils24 mils
		
			0.701 - 1.500 inch45 mils36 mils
		
			1.501 - 2.500 inches60 mils48 mils
		
			2.501 inches or greater80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20231	Issued:1983-07-07
			Revised:2023-02-28


Rating	150 deg C, voltage not assigned, Cable Flame, Optional - 80 deg C Oil Resistant.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure. The designations of all style wires used in making the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All insulated conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted insulated conductors or groups is not specified. Optional fillers may be provided. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of insulated conductors.

Shield	Optional.

Jacket	Extruded FEP.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	25 mils	20 mils
	0.426 - 0.700 inch	30 mils	24 mils
	0.701 - 1.500 inch	45 mils	36 mils
	1.501 - 2.500 inches	60 mils	48 mils
	2.501 inches or greater	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of appliances or electronic equipment.