UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20234
                        
                            Issued:1983-10-31
                    
                            Revised:2018-03-16
                    
                            Style
                            20234
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 600, 1000 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be extruded thermoplastic, a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. Fillers may be provided.
		
			ShieldOptional.
		
			CoveringOptional.
		
			BraidOptional, provided over Jacket.
		
			JacketPUR.
		
			Diameter of core assembly under jacketMinimum averageMinimum at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20234	Issued:1983-10-31
			Revised:2018-03-16


Rating	80 deg C, 600, 1000 Vac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be extruded thermoplastic, a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. Fillers may be provided.

Shield	Optional.

Covering	Optional.

Braid	Optional, provided over Jacket.

Jacket	PUR.
	Diameter of core assembly under jacket	Minimum average	Minimum at any point
	0.700 inch or less	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.