UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20248
                        
                            Issued:1983-02-10
                    
                            Revised:2019-11-07
                    
                            Style
                            20248
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded FEP
		
			dia of cable under jacket
		
			0.425 inches or less(const A)10 mils min average8 mils minimum at any point
		
			dia of cable under jacket of 0.425 or less(const B)20 avg16 min
		
			0.426-0.700 dia(const A)10 avg8 min
		
			0.426-0.700 dia(const B)30 avg24 min
		
			0.701-1.500 dia(const A)20 avg16 min
		
			0.701-1.500 dia(const B)40 avg32 min
		
			1.501-2.500 dia(const A)30 avg24 min
		
			1.501-2.500 dia(const B)50 avg40 min
		
			2.501 dia and larger(const A)30 avg24 min
		
			2.501 dia and larger(const B)60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A Internal wiring of appliances, and electronic equipment. Construction AB Internal or external wiring of appliances and electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20248	Issued:1983-02-10
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded FEP
	dia of cable under jacket
	0.425 inches or less	(const A)	10 mils min average	8 mils minimum at any point
	dia of cable under jacket of 0.425 or less	(const B)	20 avg	16 min
	0.426-0.700 dia	(const A)	10 avg	8 min
	0.426-0.700 dia	(const B)	30 avg	24 min
	0.701-1.500 dia	(const A)	20 avg	16 min
	0.701-1.500 dia	(const B)	40 avg	32 min
	1.501-2.500 dia	(const A)	30 avg	24 min
	1.501-2.500 dia	(const B)	50 avg	40 min
	2.501 dia and larger	(const A)	30 avg	24 min
	2.501 dia and larger	(const B)	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A Internal wiring of appliances, and electronic equipment. Construction AB Internal or external wiring of appliances and electronic equipment.