UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20253
                        
                            Issued:1983-03-08
                    
                            Revised:2019-11-07
                    
                            Style
                            20253
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG - 12 AWG, solid or stranded.
		
			InsulationExtruded PE or extruded FRPE, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional -A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.700 inches or less*30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20253	Issued:1983-03-08
			Revised:2019-11-07


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG - 12 AWG, solid or stranded.

Insulation	Extruded PE or extruded FRPE, 30 mils min average, 27 mils minimum at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional -A 6 mil or heavier extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	dia of cable under jacket
	0.700 inches or less*	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.