UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20254
                        
                            Issued:1983-03-10
                    
                            Revised:2019-11-07
                    
                            Style
                            20254
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal or Cable flame.
		
			Conductor40 AWG min., solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU
		
			dia of cable under jacket
		
			0.700 inches or less*30 mils minimum average thickness24 mils minimum thickness at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring in Class 2 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20254	Issued:1983-03-10
			Revised:2019-11-07


Rating	60 deg C, 30 Vac, Horizontal or Cable flame.

Conductor	40 AWG min., solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 6 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.

Jacket	Extruded TPU
	dia of cable under jacket
	0.700 inches or less*	30 mils minimum average thickness	24 mils minimum thickness at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring in Class 2 circuits.