UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20255
                        
                            Issued:1983-03-10
                    
                            Revised:2012-03-07
                    
                            Style
                            20255
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating90 deg C, 30 Vac, Cable flame.
		
			Insulated Conductor40 AWG minimum.  Labeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.
		
			CoveringOptional.  Extruded PVC, 6 mils or heavier, covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded TPE
		
			* Dia of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001 - 1.500 inch60 mils48 mils
		
			1.501 - 2.500 inches80 mils64 mils
		
			2.501 - 4.000 inches110 mils88 mils
		
			4.001 inches and larger140 mils112 mils
		
			* Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20255	Issued:1983-03-10
			Revised:2012-03-07


Rating	90 deg C, 30 Vac, Cable flame.

Insulated Conductor	40 AWG minimum. Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional.

Covering	Optional. Extruded PVC, 6 mils or heavier, covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded TPE
	* Dia of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001 - 1.500 inch	60 mils	48 mils
	1.501 - 2.500 inches	80 mils	64 mils
	2.501 - 4.000 inches	110 mils	88 mils
	4.001 inches and larger	140 mils	112 mils
	* Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.