UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20259
                        
                            Issued:1983-04-01
                    
                            Revised:2012-04-10
                    
                            Style
                            20259
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationExtruded PP, 3.5 - 30 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Cable may be either straight or wound in retractile form.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less30 mils24 mils
		
			0.426-0.700 inch45 mils36 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20259	Issued:1983-04-01
			Revised:2012-04-10


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Extruded PP, 3.5 - 30 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Cable may be either straight or wound in retractile form.

Shield	Optional.

Covering	Optional - A 6 mils or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	30 mils	24 mils
	0.426-0.700 inch	45 mils	36 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.