UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20271
                        
                            Issued:1983-05-23
                    
                            Revised:2012-03-20
                    
                            Style
                            20271
                        
                            Multiple Conductor with Extruded Insulation and Covering
                    
			Rating85 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame.
		
			Conductor20 AWG - 14 AWG.
		
			InsulationTPE, 20 mils min average, 18 mils min at any point for conductor sizes Nos. 20-16 and 25 mils min average, 22 mils min at any point for No. 14 AWG. In lieu of one of the conductors, an insulated single labeled or complying with the Manufacturer's AWM Procedure having a minimum rating of 90 deg. C and 300 V may be used.
		
			Conductor Core CoveringCarbon loaded, chemically cross-linked or irradiated polyethylene (XLPE) core covering, thickness not specified.
		
			Assembly2 or 3 conductors. Over the conductor core is a carbon loaded, chemically cross-linked or irradiated polyethylene (XLPE)covering, thickness not specified. Optional shield, optional braid, optional jacket, optional covering over jacket.
		
			ShieldOptional.
		
			BraidOptional.
		
			JacketOptional extruded FEP or TPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20271	Issued:1983-05-23
			Revised:2012-03-20


Rating	85 deg C, 120 Vac, 240 Vac, 300 Vac, Horizontal flame.

Conductor	20 AWG - 14 AWG.

Insulation	TPE, 20 mils min average, 18 mils min at any point for conductor sizes Nos. 20-16 and 25 mils min average, 22 mils min at any point for No. 14 AWG. In lieu of one of the conductors, an insulated single labeled or complying with the Manufacturer's AWM Procedure having a minimum rating of 90 deg. C and 300 V may be used.

Conductor Core Covering	Carbon loaded, chemically cross-linked or irradiated polyethylene (XLPE) core covering, thickness not specified.

Assembly	2 or 3 conductors. Over the conductor core is a carbon loaded, chemically cross-linked or irradiated polyethylene (XLPE)covering, thickness not specified. Optional shield, optional braid, optional jacket, optional covering over jacket.

Shield	Optional.

Braid	Optional.

Jacket	Optional extruded FEP or TPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.