UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20292
                        
                            Issued:1983-12-07
                    
                            Revised:2012-01-12
                    
                            Style
                            20292
                        
                            Heating Cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG - 14 AWG solid or stranded round, tinned or bare copper. Conductive Core - Over the conductor is an extruded semi-conductive high temperature thermoplastic or thermoset covering.
		
			InsulationFEP or PVDF or TPE or XLPE, 20 mils min average, 18 mils minimum at any point. (See Facing Page for Compound Designations)
		
			AssemblyTwo or three conductors. Parallel to the covering 1, 2 or 3 Recognized style may be placed. Cable is constructed of conductor with conductive core, optional inner covering, optional shield, optional jacket, optional outer covering.
		
			ShieldOptional.
		
			Covering(Optional) Inner- 12 mils min at any point, TPE. (Optional) Outer - 10 mils min at any point, FEP, or 13 mils min at any point, ECTFE.
		
			BraidOptional.
		
			JacketOptional. FEP or PVDF or TPE or XLPE, 20 mils min average, 16 mils minimum at any point. See facing page for compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20292	Issued:1983-12-07
			Revised:2012-01-12


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG - 14 AWG solid or stranded round, tinned or bare copper. Conductive Core - Over the conductor is an extruded semi-conductive high temperature thermoplastic or thermoset covering.

Insulation	FEP or PVDF or TPE or XLPE, 20 mils min average, 18 mils minimum at any point. (See Facing Page for Compound Designations)

Assembly	Two or three conductors. Parallel to the covering 1, 2 or 3 Recognized style may be placed. Cable is constructed of conductor with conductive core, optional inner covering, optional shield, optional jacket, optional outer covering.

Shield	Optional.

Covering	(Optional) Inner- 12 mils min at any point, TPE. (Optional) Outer - 10 mils min at any point, FEP, or 13 mils min at any point, ECTFE.

Braid	Optional.

Jacket	Optional. FEP or PVDF or TPE or XLPE, 20 mils min average, 16 mils minimum at any point. See facing page for compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe Heating Cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.