UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20302
                        
                            Issued:1984-01-25
                    
                            Revised:2012-03-20
                    
                            Style
                            20302
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum.
		
			InsulationExtruded PP or XLPP, 2 mils minimum thickness at any point, 100 mils maximum thickness. Irradiation optional. Barrier layer and/or fillers optional.
		
			AssemblyTwo through seven conductors.
		
			ShieldOptional.
		
			CoveringOptional - 2 mils minimum thickness at any point, extruded PVC or Polyamide, or Polyester or lacquered braid.
		
			JacketExtruded Nylon (POLYAMIDE) or POLYESTER or PVC, 2 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20302	Issued:1984-01-25
			Revised:2012-03-20


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum.

Insulation	Extruded PP or XLPP, 2 mils minimum thickness at any point, 100 mils maximum thickness. Irradiation optional. Barrier layer and/or fillers optional.

Assembly	Two through seven conductors.

Shield	Optional.

Covering	Optional - 2 mils minimum thickness at any point, extruded PVC or Polyamide, or Polyester or lacquered braid.

Jacket	Extruded Nylon (POLYAMIDE) or POLYESTER or PVC, 2 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.