UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20305
                        
                            Issued:1984-02-16
                    
                            Revised:2012-06-08
                    
                            Style
                            20305
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, voltage not specified, Horizontal flame.
		
			Conductor38 AWG - 18 AWG, solid, stranded or tinsel.  May be flat and wrapped around polymide or polyester thread.
		
			InsulationExtruded Nylon, 7 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			Assembly2 - 60 conductors.  May include mixed AWG sizes.  Cable may be either straight or wound in retractile form.  Core may be either flat or round.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			3.5 mm or less20 mils16 mils
		
			3.6 - 5.0 mm30 mils24 mils
		
			5.1 - 7.0 mm40 mils32 mils
		
			7.1 - 10.0 mm50 mils40 mils
		
			10.1 mm and larger60 mils48 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal cable of electronic equipment, or as "Handset Wire or Telephone Cord for Subscriber Sets".
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20305	Issued:1984-02-16
			Revised:2012-06-08


Rating	60 deg C, voltage not specified, Horizontal flame.

Conductor	38 AWG - 18 AWG, solid, stranded or tinsel. May be flat and wrapped around polymide or polyester thread.

Insulation	Extruded Nylon, 7 mils minimum average thickness, 5 mils minimum thickness at any point.

Assembly	2 - 60 conductors. May include mixed AWG sizes. Cable may be either straight or wound in retractile form. Core may be either flat or round.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	3.5 mm or less	20 mils	16 mils
	3.6 - 5.0 mm	30 mils	24 mils
	5.1 - 7.0 mm	40 mils	32 mils
	7.1 - 10.0 mm	50 mils	40 mils
	10.1 mm and larger	60 mils	48 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal cable of electronic equipment, or as "Handset Wire or Telephone Cord for Subscriber Sets".