UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20306
                        
                            Issued:1984-02-16
                    
                            Revised:2012-12-28
                    
                            Style
                            20306
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, voltage not specified, Horizontal flame.
		
			Conductor38 - 18 AWG. Solid or stranded or tinsel. May include mixed AWG sizes. May be flat and wrapped around polymide or polyester thread.
		
			InsulationExtruded PP, 7 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			3.5 mm or less20 mils16 mils
		
			3.6-5.0 mm30 mils24 mils
		
			5.1-7.0 mm40 mils32 mils
		
			7.1-10.0 mm50 mils40 mils
		
			10.1 mm or larger60 mils48 mils
		
			*Major diam if cable is flat or oval.
		
			AssemblyCable may be either straight or wound in retractile form. Core may be either flat or round.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal cable of electronic equipment, or as "Handset Wire or Telephone Cord for Subscriber Sets".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20306	Issued:1984-02-16
			Revised:2012-12-28


Rating	60 deg C, voltage not specified, Horizontal flame.

Conductor	38 - 18 AWG. Solid or stranded or tinsel. May include mixed AWG sizes. May be flat and wrapped around polymide or polyester thread.

Insulation	Extruded PP, 7 mils minimum average thickness, 5 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	3.5 mm or less	20 mils	16 mils
	3.6-5.0 mm	30 mils	24 mils
	5.1-7.0 mm	40 mils	32 mils
	7.1-10.0 mm	50 mils	40 mils
	10.1 mm or larger	60 mils	48 mils
	*Major diam if cable is flat or oval.

Assembly	Cable may be either straight or wound in retractile form. Core may be either flat or round.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal cable of electronic equipment, or as "Handset Wire or Telephone Cord for Subscriber Sets".