UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20319
                        
                            Issued:1984-05-18
                    
                            Revised:2019-11-07
                    
                            Style
                            20319
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating90 deg C, no voltage assigned, Cable Flame.
		
			Conductor40 AWG min - Material not specified.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional, manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional - May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded PUR -
		
			dia of cable under jacket
		
			0.425 inches or less*45 mils min average36 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection of electronic equipment (such as computers and business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20319	Issued:1984-05-18
			Revised:2019-11-07


Rating	90 deg C, no voltage assigned, Cable Flame.

Conductor	40 AWG min - Material not specified.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional, manufacturer shall maintain a complete description of each assembly.

Shield	Optional - May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded PUR -
	dia of cable under jacket
	0.425 inches or less*	45 mils min average	36 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection of electronic equipment (such as computers and business machines).