UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20325
                        
                            Issued:1984-06-22
                    
                            Revised:2012-07-26
                    
                            Style
                            20325
                        
                            Multiple Conductor Flat Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal Flame.
		
			Conductor18 - 14 AWG, Stranded Round.
		
			InsulationLabeled or complying with Manufacturer's AWM procedure.
		
			AssemblyThe cable consists of two or more insulated conductors laid flat and parallel in a single plane or a flat cable, an overall shield and a PVC insulation. A drain wire with a conductive thermoplastic covering may be employed and laid parallel with the insulated conductors. Insulated conductors shall not employ black insulation when a black semi-conducting shield is employed.
		
			ShieldOptional.
		
			JacketExtruded PVC - 9 mil minimum average, 7 mil minimum at any point. Alignment rib may be provided on outside conductors. PVC is Non-Integral.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20325	Issued:1984-06-22
			Revised:2012-07-26


Rating	80 deg C, 300 Vac, Horizontal Flame.

Conductor	18 - 14 AWG, Stranded Round.

Insulation	Labeled or complying with Manufacturer's AWM procedure.

Assembly	The cable consists of two or more insulated conductors laid flat and parallel in a single plane or a flat cable, an overall shield and a PVC insulation. A drain wire with a conductive thermoplastic covering may be employed and laid parallel with the insulated conductors. Insulated conductors shall not employ black insulation when a black semi-conducting shield is employed.

Shield	Optional.

Jacket	Extruded PVC - 9 mil minimum average, 7 mil minimum at any point. Alignment rib may be provided on outside conductors. PVC is Non-Integral.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.