UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20333
                        
                            Issued:1984-07-26
                    
                            Revised:2012-04-12
                    
                            Style
                            20333
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Inner Conductor40 AWG - 18 AWG, solid or stranded.
		
			InsulationInner Layer - Extruded foamed PE or extruded foamed XLPE. Outer Layer - Extruded PE or extruded XLPE. 3 - 100 mils total composite thickness, Two layers are non-separable.
		
			AssemblyTwo conductors.
		
			ShieldOptional.
		
			CoveringOptional - PETP tape or polyester tape, 0.7 mil minimum thickness, applied with minimum 50 percent overlap.
		
			Outer ConductorOptional.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20333	Issued:1984-07-26
			Revised:2012-04-12


Rating	80 deg C, 30 Vac, Cable flame.

Inner Conductor	40 AWG - 18 AWG, solid or stranded.

Insulation	Inner Layer - Extruded foamed PE or extruded foamed XLPE. Outer Layer - Extruded PE or extruded XLPE. 3 - 100 mils total composite thickness, Two layers are non-separable.

Assembly	Two conductors.

Shield	Optional.

Covering	Optional - PETP tape or polyester tape, 0.7 mil minimum thickness, applied with minimum 50 percent overlap.

Outer Conductor	Optional.

Jacket	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.