UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20336
                        
                            Issued:1984-08-09
                    
                            Revised:2012-04-26
                    
                            Style
                            20336
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min.
		
			InsulationLabeled or complying with manufacturer's AWM procedure. Material not specified.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional - Extruded PVC, 5 mils minimum thickness, may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils23 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and External Interconnection in Class 2 Circuits and Electronic Equipment, where each end is terminated in conductor.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20336	Issued:1984-08-09
			Revised:2012-04-26


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min.

Insulation	Labeled or complying with manufacturer's AWM procedure. Material not specified.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional - Extruded PVC, 5 mils minimum thickness, may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	23 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and External Interconnection in Class 2 Circuits and Electronic Equipment, where each end is terminated in conductor.