UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20340
                        
                            Issued:1984-08-20
                    
                            Revised:2012-04-13
                    
                            Style
                            20340
                        
                            Laminated flat ribbon cable
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG - 16 AWG solid or stranded round.
		
			InsulationLabeled Styles 1007, 1061 or 1095.
		
			AssemblyTwo to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from 2 to 100 in apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 in width of PVC bands, approx 3/16 in. Manu- facturer shall maintain a record of all singles used in each cable.
		
			JacketOptional -extruded PVC, 12 mils min average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20340	Issued:1984-08-20
			Revised:2012-04-13


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 16 AWG solid or stranded round.

Insulation	Labeled Styles 1007, 1061 or 1095.

Assembly	Two to 100 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals from 2 to 100 in apart, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections min 1 in width of PVC bands, approx 3/16 in. Manu- facturer shall maintain a record of all singles used in each cable.

Jacket	Optional -extruded PVC, 12 mils min average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring