UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20349
                        
                            Issued:1984-10-24
                    
                            Revised:2013-01-15
                    
                            Style
                            20349
                        
                            Flat Ribbon Cable
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG minimum.
		
			InsulationConsists of two layers. Outer layer: Extruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point. Inner layer: PVC or XLPVC sheets bonded each side of conductors, 26 mils minimum distance between conductors, 6 mils minimum edge width.
		
			Assembly2-50 conductor held parallel in one plane. One or more conductors may be contact with shield.
		
			ShieldOptional.
		
			CoveringOptional. Laminated one or two sheets of PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20349	Issued:1984-10-24
			Revised:2013-01-15


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG minimum.

Insulation	Consists of two layers. Outer layer: Extruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point. Inner layer: PVC or XLPVC sheets bonded each side of conductors, 26 mils minimum distance between conductors, 6 mils minimum edge width.

Assembly	2-50 conductor held parallel in one plane. One or more conductors may be contact with shield.

Shield	Optional.

Covering	Optional. Laminated one or two sheets of PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.