UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20353
                        
                            Issued:1984-11-07
                    
                            Revised:2012-12-28
                    
                            Style
                            20353
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, voltage not specified, Cable flame.
		
			Conductor40 AWG minimum.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.
		
			ShieldOptional, may be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded TPU.
		
			Diameter of core assessbly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20353	Issued:1984-11-07
			Revised:2012-12-28


Rating	60 deg C, voltage not specified, Cable flame.

Conductor	40 AWG minimum.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.

Shield	Optional, may be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded TPU.
	Diameter of core assessbly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.