UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20362
                        
                            Issued:1984-12-21
                    
                            Revised:2011-10-05
                    
                            Style
                            20362
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating150 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketECTFE
		
			Dia of Cable Under Jacket in inchesminimum average thickness milsminimum at any point mils
		
			0.425 or less2520
		
			0.426 - 0.7003024
		
			0.701 - 1.5004536
		
			1.501 - 2.5006048
		
			2.501 and larger8064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: 600 V peak, for electronic use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20362	Issued:1984-12-21
			Revised:2011-10-05


Rating	150 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	ECTFE
	Dia of Cable Under Jacket in inches	minimum average thickness mils	minimum at any point mils
	0.425 or less	25	20
	0.426 - 0.700	30	24
	0.701 - 1.500	45	36
	1.501 - 2.500	60	48
	2.501 and larger	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: 600 V peak, for electronic use only.