UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20363
                        
                            Issued:1984-12-21
                    
                            Revised:2012-05-14
                    
                            Style
                            20363
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.  If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified.  A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap.  Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketExtruded ECTFE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inches or less30 mils24 mils
		
			0.426-0.700 inch45 mils36 mils
		
			0.701-1.500 inches55 mils44 mils
		
			1.501-2.500 inches65 mils50 mils
		
			2.501 inches and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: 2500 V peak, for electronic use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20363	Issued:1984-12-21
			Revised:2012-05-14


Rating	150 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	Extruded ECTFE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inches or less	30 mils	24 mils
	0.426-0.700 inch	45 mils	36 mils
	0.701-1.500 inches	55 mils	44 mils
	1.501-2.500 inches	65 mils	50 mils
	2.501 inches and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment. In addition, the tag may also indicate the following: 2500 V peak, for electronic use only.