UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20364
                        
                            Issued:1984-12-21
                    
                            Revised:2019-11-07
                    
                            Style
                            20364
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C, no voltage assigned, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure and having a min rating of 150 deg C. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			ShieldOptional.
		
			ConductorTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketECTFE
		
			dia of the cable under jacket in inches
		
			0.425 or less25 mils min average20 mils minimum at any point
		
			0.426-0.700 dia30 avg24 min
		
			0.701-1.500 dia45 avg36 min
		
			1.501-2.500 dia60 avg48 min
		
			2.501 dia and larger80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20364	Issued:1984-12-21
			Revised:2019-11-07


Rating	150 deg C, no voltage assigned, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure and having a min rating of 150 deg C. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Shield	Optional.

Conductor	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	ECTFE
	dia of the cable under jacket in inches
	0.425 or less	25 mils min average	20 mils minimum at any point
	0.426-0.700 dia	30 avg	24 min
	0.701-1.500 dia	45 avg	36 min
	1.501-2.500 dia	60 avg	48 min
	2.501 dia and larger	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment.