UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20372
                        
                            Issued:1985-01-22
                    
                            Revised:2011-12-05
                    
                            Style
                            20372
                        
                            Flat Ribbon Cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame or Cable flame.
		
			Conductor36 AWG - 20 AWG solid or stranded round, tinned or bare copper.
		
			InsulationExtruded or heat laminated PVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Irradiation optional. or Labeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo through 100 laid parallel with spaces 0.025 in. min between conductors.
		
			ShieldOptional - or PETP tape faced, expanded copper mesh ground plane. One or more drain wires shall be in contact with shield or ground plane.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or External wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20372	Issued:1985-01-22
			Revised:2011-12-05


Rating	105 deg C, 300 Vac, Horizontal flame or Cable flame.

Conductor	36 AWG - 20 AWG solid or stranded round, tinned or bare copper.

Insulation	Extruded or heat laminated PVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Irradiation optional. or Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two through 100 laid parallel with spaces 0.025 in. min between conductors.

Shield	Optional - or PETP tape faced, expanded copper mesh ground plane. One or more drain wires shall be in contact with shield or ground plane.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or External wiring