UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20373
                        
                            Issued:1985-01-22
                    
                            Revised:2012-12-12
                    
                            Style
                            20373
                        
                            Multiconductor flat cable with extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 18 AWG. One or more conductors covered with 3-40 mils conductive PVC or PE covering.
		
			InsulationExtruded PVC, extruded PE, extruded FRPE, extruded foamed PVC, extruded foamed PE, extruded foamed FRPE, extruded XLPVC, extruded XLPE, extruded XLFRPE, extruded foamed XLPVC, extruded foamed XLPE or extruded foamed XLFRPE, 3 mils minimum thickness at any point, 40 mils maximum average thickness.
		
			ShieldOptional.
		
			AssemblyMaximum 10 conductors. Insulated conductors and conductive covered conductors laid parallel in one plane. At least one conductor must not have conductive coating. May include barrier layer or fillers.
		
			JacketExtruded PVC, 3 mils minimum thickness at any point. 40 mils maximum average thickness. Optional - jacket may form web, maximum 0.250 inch width.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20373	Issued:1985-01-22
			Revised:2012-12-12


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 18 AWG. One or more conductors covered with 3-40 mils conductive PVC or PE covering.

Insulation	Extruded PVC, extruded PE, extruded FRPE, extruded foamed PVC, extruded foamed PE, extruded foamed FRPE, extruded XLPVC, extruded XLPE, extruded XLFRPE, extruded foamed XLPVC, extruded foamed XLPE or extruded foamed XLFRPE, 3 mils minimum thickness at any point, 40 mils maximum average thickness.

Shield	Optional.

Assembly	Maximum 10 conductors. Insulated conductors and conductive covered conductors laid parallel in one plane. At least one conductor must not have conductive coating. May include barrier layer or fillers.

Jacket	Extruded PVC, 3 mils minimum thickness at any point. 40 mils maximum average thickness. Optional - jacket may form web, maximum 0.250 inch width.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.