UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20376
                        
                            Issued:1985-02-26
                    
                            Revised:2012-05-22
                    
                            Style
                            20376
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating105 deg C, 600 Vac, Cable Flame.
		
			Conductor36 AWG min, Solid or Stranded Round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			diameter of cable under jacket in inches*mils minimum averagemils minimum at any point
		
			0.700 or less4536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.500 and larger140112
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20376	Issued:1985-02-26
			Revised:2012-05-22


Rating	105 deg C, 600 Vac, Cable Flame.

Conductor	36 AWG min, Solid or Stranded Round.

Insulation	Labeled or complying with manufacturer's AWM procedure

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded TPU
	diameter of cable under jacket in inches*	mils minimum average	mils minimum at any point
	0.700 or less	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.500 and larger	140	112
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection of electronic equipment.