UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20387
                        
                            Issued:1985-03-25
                    
                            Revised:2019-11-07
                    
                            Style
                            20387
                        
                            Multiple-conductor cable using non-integral extruded jacket.
                    
			Rating105 deg C, 300 Vac, Cable flame, Oil Resis 60 or 80C, Moisture Resis 75C, 720hr Sunlight Resistance.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure having a minimum rating of 75 deg C wet, and 60 deg C or 80 deg C oil .
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed sizes of insulated singles.
		
			ShieldOptional - may be over one or more of the insulated conductors or applied over the assembly.
		
			JacketPVC. Recognized Component - Polymeric Materials for Use in Wire and Cable (QMTT2). 720 Hour Sunlight Resistant Jacket Compounds
		
			dia of the cable under jacket
		
			0.700 inches or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20387	Issued:1985-03-25
			Revised:2019-11-07


Rating	105 deg C, 300 Vac, Cable flame, Oil Resis 60 or 80C, Moisture Resis 75C, 720hr Sunlight Resistance.

Insulation	Labeled or complies with manufacturer's AWM Procedure having a minimum rating of 75 deg C wet, and 60 deg C or 80 deg C oil .

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed sizes of insulated singles.

Shield	Optional - may be over one or more of the insulated conductors or applied over the assembly.

Jacket	PVC. Recognized Component - Polymeric Materials for Use in Wire and Cable (QMTT2). 720 Hour Sunlight Resistant Jacket Compounds
	dia of the cable under jacket
	0.700 inches or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring