UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2039
                        
                            Issued:1959-05-01
                    
                            Revised:2012-03-02
                    
                            Style
                            2039
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating90 deg C, 600 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.
		
			InsulationIntegral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyTwo conductor, same as SPT-3.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 90 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2039	Issued:1959-05-01
			Revised:2012-03-02


Rating	90 deg C, 600 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	18 AWG - 16 AWG consisting of No. 30 AWG or smaller stranded, tinned or bare copper.

Insulation	Integral with Jacket. PVC, 60 mils min average, 54 mils minimum at any point.

Assembly	Two conductor, same as SPT-3.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 90 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.