UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20394
                        
                            Issued:1985-05-21
                    
                            Revised:2011-12-22
                    
                            Style
                            20394
                        
                            Parallel cable with extruded integral insulation
                    
			Rating60 deg C, 300 Vac.
		
			ConductorTwo No. 16-18 AWG, bare stranded (No. 36-34 AWG strands) copper and one No. 22-26 AWG bare, stranded (No. 36 AWG strands) copper. The two 16-18 AWG conductors shall be parallel and the No.  22-26 AWG conductor shall be located between the No. 16-18 AWG conductors.
		
			InsulationIntegral with jacket, PVC, 45 mils min average, 40 mils minimum at any point. A 3 mil min at any point covering of nylon, polyester or propylene shall be applied directly over the No. 22 or 24 AWG copper conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20394	Issued:1985-05-21
			Revised:2011-12-22


Rating	60 deg C, 300 Vac.

Conductor	Two No. 16-18 AWG, bare stranded (No. 36-34 AWG strands) copper and one No. 22-26 AWG bare, stranded (No. 36 AWG strands) copper. The two 16-18 AWG conductors shall be parallel and the No. 22-26 AWG conductor shall be located between the No. 16-18 AWG conductors.

Insulation	Integral with jacket, PVC, 45 mils min average, 40 mils minimum at any point. A 3 mil min at any point covering of nylon, polyester or propylene shall be applied directly over the No. 22 or 24 AWG copper conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.