UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20396
                        
                            Issued:1985-04-24
                    
                            Revised:2012-04-26
                    
                            Style
                            20396
                        
                            Bonded or laminated flat ribbon cable
                    
			Rating90 deg C, 125 Vac, Horizontal flame.
		
			Conductor48 AWG - 20 AWG bare, tinned or plated, flat conductors. Min thickness of 1.0 mils; max thickness of 6 mils. Min width of 5.0 mils; max width of 1 inch. Conductors may be straight or irregularly shaped and are in one plane.
		
			InsulationPOLYESTER, On each side of the conductors a 1.5 mils min at any point wall of polyester film with polyester or epoxy adhesive backing. Min 3.5 mils of insulation on outside edges of strip and 4.5 mils min of insulation between adjacent conductors. Length of insulated conductors not specified.
		
			AssemblyTwo through 200 conductors
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20396	Issued:1985-04-24
			Revised:2012-04-26


Rating	90 deg C, 125 Vac, Horizontal flame.

Conductor	48 AWG - 20 AWG bare, tinned or plated, flat conductors. Min thickness of 1.0 mils; max thickness of 6 mils. Min width of 5.0 mils; max width of 1 inch. Conductors may be straight or irregularly shaped and are in one plane.

Insulation	POLYESTER, On each side of the conductors a 1.5 mils min at any point wall of polyester film with polyester or epoxy adhesive backing. Min 3.5 mils of insulation on outside edges of strip and 4.5 mils min of insulation between adjacent conductors. Length of insulated conductors not specified.

Assembly	Two through 200 conductors

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.