UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20399
                        
                            Issued:1985-04-29
                    
                            Revised:2019-11-07
                    
                            Style
                            20399
                        
                            Laminated flat ribbon cable
                    
			Rating90 deg C, 150 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles cabled together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - A 15 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.
		
			JacketSRPVC
		
			dia of cable under jacket
		
			0.425 inches or less20 mils min average16 mils minimum at any point
		
			0.426-0.700 dia30 avg24 min
		
			0.701-1.000 dia40 avg36 min
		
			1.001-1.500 dia50 avg40 min
		
			1.501-2.500 dia60 avg48 min
		
			2.501 dia and larger80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment
Internal Wiring or External Interconnection of
			Electronic Equipment

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20399	Issued:1985-04-29
			Revised:2019-11-07


Rating	90 deg C, 150 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles cabled together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - A 15 mil or heavier Extruded PVC covering may be extruded over the conductor assembly.

Jacket	SRPVC
	dia of cable under jacket
	0.425 inches or less	20 mils min average	16 mils minimum at any point
	0.426-0.700 dia	30 avg	24 min
	0.701-1.000 dia	40 avg	36 min
	1.001-1.500 dia	50 avg	40 min
	1.501-2.500 dia	60 avg	48 min
	2.501 dia and larger	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment Internal Wiring or External Interconnection of Electronic Equipment