UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20402
                        
                            Issued:1985-05-22
                    
                            Revised:2012-02-29
                    
                            Style
                            20402
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 60 Vac, Cable flame.
		
			Conductor33 AWG - 10 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a flat cable with no more than three rows of single conductors or groups of conductors. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene tereph thalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketExtruded PVC
		
			Majar diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001 - 1.500 inch60 mils48 mils
		
			1.501 - 2.500 inches80 mils64 mils
		
			2.501 - 4.000 inches110 mils88 mils
		
			4.001 inches and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal and internal wiring of Class 2 wiring systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20402	Issued:1985-05-22
			Revised:2012-02-29


Rating	60 deg C, 60 Vac, Cable flame.

Conductor	33 AWG - 10 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a flat cable with no more than three rows of single conductors or groups of conductors. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene tereph thalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	Extruded PVC
	Majar diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001 - 1.500 inch	60 mils	48 mils
	1.501 - 2.500 inches	80 mils	64 mils
	2.501 - 4.000 inches	110 mils	88 mils
	4.001 inches and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External and internal wiring of Class 2 wiring systems.