UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20406
                        
                            Issued:1985-07-03
                    
                            Revised:2012-05-22
                    
                            Style
                            20406
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Inner Conductor40 AWG minimum, Solid or Stranded Round.
		
			InsulationInner layer - Extruded foamed PE or extruded foamed XLPE. Outer layer - Extruded PE or extruded XLPE. 3 - 100 mils total composite thickness, Two layers are non-separable.
		
			AssemblyTwo to four conductors, Insulated conductors or shielded insulated conductors may be laid parallel or twisted together to form flat or round cable. Length of lay not specified.
		
			ShieldOptional.
		
			Inner CoveringOptional - Extruded PVC, extruded nylon (polyamide), extruded TPE, extruded FEP, extruded PVDF, extruded ETFE or non-extruded lacquered braid, 2 mils minimum thickness at any point.
		
			Outer ConductorOptional.
		
			Outer CoveringOptional - Over metal braid shield, otherwise, extruded PVC, extruded nylon (polyamide), extruded FEP, extruded PVDF, extruded ETFE or lacquered braid, 2 mils minimum thickness at any pont.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20406	Issued:1985-07-03
			Revised:2012-05-22


Rating	80 deg C, 30 Vac, Horizontal Flame.

Inner Conductor	40 AWG minimum, Solid or Stranded Round.

Insulation	Inner layer - Extruded foamed PE or extruded foamed XLPE. Outer layer - Extruded PE or extruded XLPE. 3 - 100 mils total composite thickness, Two layers are non-separable.

Assembly	Two to four conductors, Insulated conductors or shielded insulated conductors may be laid parallel or twisted together to form flat or round cable. Length of lay not specified.

Shield	Optional.

Inner Covering	Optional - Extruded PVC, extruded nylon (polyamide), extruded TPE, extruded FEP, extruded PVDF, extruded ETFE or non-extruded lacquered braid, 2 mils minimum thickness at any point.

Outer Conductor	Optional.

Outer Covering	Optional - Over metal braid shield, otherwise, extruded PVC, extruded nylon (polyamide), extruded FEP, extruded PVDF, extruded ETFE or lacquered braid, 2 mils minimum thickness at any pont.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.