UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20409
                        
                            Issued:1985-07-25
                    
                            Revised:2012-01-12
                    
                            Style
                            20409
                        
                            Flat Ribbon Cable
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 20 AWG material not specified.
		
			InsulationETFE or FEP or PFA or PTFE, TFE, 3 mils min average, 3 mils minimum at any point. PTFE or FEP may be cellular. One or two layer spiral tape wrap using above material with minimum 50 percent overlap 3 mils minimum insulation thickness at any point.
		
			AssemblyTwo to 300 conductors, same or mixed AWG. Singles laid parallel to form ribbon cable. (Optional) Singles may be separated at web portions intermittently along the lengthwise direction of the cable. Insulation is built with inner covering (optional), shield (optional), and outer covering.
		
			Shield(Optional) - Drain wires may be embedded in web of covering in physical contact with shields.
		
			CoveringInner - Optional - Extruded PTFE, PFA, FEP, or ETFE, or Spirally wrapped polyethylene terephthalate (PETP) tape using PVC or polyester adhesive. Lay not specified. Outer - Covering Extruded PVC, 3 mils minimum at any point. PTFE, PFA, FEP or ETFE, 2 mils minimum at any point.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Class 2 Circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20409	Issued:1985-07-25
			Revised:2012-01-12


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 20 AWG material not specified.

Insulation	ETFE or FEP or PFA or PTFE, TFE, 3 mils min average, 3 mils minimum at any point. PTFE or FEP may be cellular. One or two layer spiral tape wrap using above material with minimum 50 percent overlap 3 mils minimum insulation thickness at any point.

Assembly	Two to 300 conductors, same or mixed AWG. Singles laid parallel to form ribbon cable. (Optional) Singles may be separated at web portions intermittently along the lengthwise direction of the cable. Insulation is built with inner covering (optional), shield (optional), and outer covering.

Shield	(Optional) - Drain wires may be embedded in web of covering in physical contact with shields.

Covering	Inner - Optional - Extruded PTFE, PFA, FEP, or ETFE, or Spirally wrapped polyethylene terephthalate (PETP) tape using PVC or polyester adhesive. Lay not specified. Outer - Covering Extruded PVC, 3 mils minimum at any point. PTFE, PFA, FEP or ETFE, 2 mils minimum at any point.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Class 2 Circuits in Electronic Equipment.