UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20413
                        
                            Issued:1985-08-08
                    
                            Revised:2012-07-26
                    
                            Style
                            20413
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating60 deg C, 150 Vac, Cable Flame.
		
			Conductor40 AWG - 10 AWG, Solid or Stranded Round, material not specified.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.
		
			ShieldOptional - May be over one or more of the insulated conductors or applied over the assembly.
		
			CoveringOptional - Extruded Polyester Elastomer, 20 mil minimum, 40 mils maximum at any point.
		
			JacketExtruded TPU
		
			diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			1.000 or less3024
		
			1.001-1.5004536
		
			1.501-2.5006048
		
			2.501-4.0008064
		
			4.001 and larger11088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20413	Issued:1985-08-08
			Revised:2012-07-26


Rating	60 deg C, 150 Vac, Cable Flame.

Conductor	40 AWG - 10 AWG, Solid or Stranded Round, material not specified.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.

Shield	Optional - May be over one or more of the insulated conductors or applied over the assembly.

Covering	Optional - Extruded Polyester Elastomer, 20 mil minimum, 40 mils maximum at any point.

Jacket	Extruded TPU
	diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	1.000 or less	30	24
	1.001-1.500	45	36
	1.501-2.500	60	48
	2.501-4.000	80	64
	4.001 and larger	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection.