UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20417
                        
                            Issued:1985-08-27
                    
                            Revised:2019-11-07
                    
                            Style
                            20417
                        
                            Multiple-conductor cable using non-integral extruded jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min., solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 3 mils min average.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - PVC, 4 mils minimum at any point.
		
			JacketPUR
		
			dia of cable under jacket
		
			0.700 inches or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20417	Issued:1985-08-27
			Revised:2019-11-07


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min., solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure, 3 mils min average.

Assembly	Two or more singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - PVC, 4 mils minimum at any point.

Jacket	PUR
	dia of cable under jacket
	0.700 inches or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring