UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20425
                        
                            Issued:1985-10-07
                    
                            Revised:2012-04-24
                    
                            Style
                            20425
                        
                            Flat Cable
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			Conductor36 AWG - 4 AWG bare, silver plated, tin plated, nickel plated, tin plated oxygen-free copper, or silver plated copper alloy Nos. 36-4 AWG round or flat. Minimum width 20 mils, maximum width 2-1/2 inches. Minimum thickness 1 mil, maximum thickness 15 mils.
		
			InsulationPET, PETP. On each side of the conductor 3.0 mils minimum of Oriented Polyethylene Terephthalate bonded together or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils Oriented Polyethylene Terephthalate. Minimum 15 mils insulation width on outside edges of conductors and 15 mils minimum insulation width between adjacent conductors. Length of insulted conductors not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and electric business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20425	Issued:1985-10-07
			Revised:2012-04-24


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	36 AWG - 4 AWG bare, silver plated, tin plated, nickel plated, tin plated oxygen-free copper, or silver plated copper alloy Nos. 36-4 AWG round or flat. Minimum width 20 mils, maximum width 2-1/2 inches. Minimum thickness 1 mil, maximum thickness 15 mils.

Insulation	PET, PETP. On each side of the conductor 3.0 mils minimum of Oriented Polyethylene Terephthalate bonded together or 1.5 mils minimum of polyester adhesive bonded to 1.5 mils Oriented Polyethylene Terephthalate. Minimum 15 mils insulation width on outside edges of conductors and 15 mils minimum insulation width between adjacent conductors. Length of insulted conductors not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and electric business machines.