UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20430
                        
                            Issued:1985-11-15
                    
                            Revised:2012-03-22
                    
                            Style
                            20430
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional - May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20430	Issued:1985-11-15
			Revised:2012-03-22


Rating	105 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional - May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring.