UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20433
                        
                            Issued:1986-01-06
                    
                            Revised:2012-10-25
                    
                            Style
                            20433
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, Voltage Not Specified, Cable flame.
		
			Conductor36 AWG - 10 AWG solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure, 3 mils min average.
		
			AssemblyTwo or more different conductor sizes may be used in one cable. Two conductcrs may be laid parallel or twisted together. Three or more conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. Lay of insulated conductors not specified. Barrier layer and/or fillers optional.
		
			ShieldOptional.
		
			CoveringOptional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketPVC
		
			dia of cable under jacket 0.425 inches or less30 mils min average24 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A Internal wiring of X-ray Equipment, or in the internal or external interconnection of electronic equipment. Construction B External interconnection of electronic equipment in abuse areas, such as X-ray Equipment and Business Machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20433	Issued:1986-01-06
			Revised:2012-10-25


Rating	60 deg C, Voltage Not Specified, Cable flame.

Conductor	36 AWG - 10 AWG solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure, 3 mils min average.

Assembly	Two or more different conductor sizes may be used in one cable. Two conductcrs may be laid parallel or twisted together. Three or more conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. Lay of insulated conductors not specified. Barrier layer and/or fillers optional.

Shield	Optional.

Covering	Optional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	PVC
	dia of cable under jacket 0.425 inches or less	30 mils min average	24 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min


Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A Internal wiring of X-ray Equipment, or in the internal or external interconnection of electronic equipment. Construction B External interconnection of electronic equipment in abuse areas, such as X-ray Equipment and Business Machines.