UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20438
                        
                            Issued:1986-01-30
                    
                            Revised:2011-09-22
                    
                            Style
                            20438
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 150 Vac, Horizontal Flame or Cable Flame (External).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more insulated singles, twisted pairs or groups of twisted insulated singles twisted together or insulated singles or groups of insulated singles may be laid parallel to form flat, oval or round cable. Length of lay of insulated conductors not specified. Optional barrier layer and/or fillers. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - A 10 mil or heavier PVC covering may be extruded over the insulated conductors assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			2.501-4.000110 mils88 mils
		
			4.001 or greater140 mils112 mils
		
			*Major diameter/ axis if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment (such as desk-type calculators, dictating machines, or x-ray equipment).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20438	Issued:1986-01-30
			Revised:2011-09-22


Rating	60 deg C, 150 Vac, Horizontal Flame or Cable Flame (External).

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more insulated singles, twisted pairs or groups of twisted insulated singles twisted together or insulated singles or groups of insulated singles may be laid parallel to form flat, oval or round cable. Length of lay of insulated conductors not specified. Optional barrier layer and/or fillers. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - A 10 mil or heavier PVC covering may be extruded over the insulated conductors assembly.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	2.501-4.000	110 mils	88 mils
	4.001 or greater	140 mils	112 mils
	*Major diameter/ axis if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment (such as desk-type calculators, dictating machines, or x-ray equipment).