UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20455
                        
                            Issued:1986-04-28
                    
                            Revised:2012-04-23
                    
                            Style
                            20455
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating200 deg C, 125 Vac, Horizontal flame.
		
			Conductor30 AWG - 22 AWG, solid or stranded.
		
			SeparatorOptional - Foamed PTFE tape.
		
			InsulationExtruded PTFE, 4 mils minimum thickness at any point and/or Labeled or complies with Manufacturer's AWM Procedure.
		
			AssemblyTwo to eighty conductors laid parallel and in one plane. Adjacent ground conductor may touch. One to six conductor groups may be laid parallel and placed on top of each other.
		
			Inner Barrier LayerOptional - Foamed PTFE tape.
		
			ShieldOptional.
		
			Outer Barrier LayerOptional - Foamed PTFE tape.
		
			CoveringOptional.
		
			JacketExtruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20455	Issued:1986-04-28
			Revised:2012-04-23


Rating	200 deg C, 125 Vac, Horizontal flame.

Conductor	30 AWG - 22 AWG, solid or stranded.

Separator	Optional - Foamed PTFE tape.

Insulation	Extruded PTFE, 4 mils minimum thickness at any point and/or Labeled or complies with Manufacturer's AWM Procedure.

Assembly	Two to eighty conductors laid parallel and in one plane. Adjacent ground conductor may touch. One to six conductor groups may be laid parallel and placed on top of each other.

Inner Barrier Layer	Optional - Foamed PTFE tape.

Shield	Optional.

Outer Barrier Layer	Optional - Foamed PTFE tape.

Covering	Optional.

Jacket	Extruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.