UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2046
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-16
                    
                            Style
                            2046
                        
                            Paralell cable with extruded integral insulation and jacket
                    
			Rating80 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor18 AWG consisting of No. 30 AWG or smaller stranded.
		
			InsulationIntegral with Jacket. Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo conductor, same as SPT-1.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 80 deg C. Dependent upon the compound used, the tag may add the statement: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2046	Issued:1959-05-01
			Revised:2012-04-16


Rating	80 deg C, 300 Vac, FT-2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	18 AWG consisting of No. 30 AWG or smaller stranded.

Insulation	Integral with Jacket. Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two conductor, same as SPT-1.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between walls of the cabinet, and where exposed to temperatures not exceeding 80 deg C. Dependent upon the compound used, the tag may add the statement: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.