UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20463
                        
                            Issued:1986-05-06
                    
                            Revised:2012-07-22
                    
                            Style
                            20463
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 125 Vac, Horizontal flame, Gasoline Resistant.
		
			Conductor28 AWG - 16 AWG solid or stranded round, tinned or bare copper.
		
			InsulationPE, 10 mils min average, 9 mils minimum at any point.
		
			ShieldOptional - may be applied over the polyethylene covering or insulated conductors.
		
			CoveringInner covering - 15 mil min at any point of polyethylene covering extruded over the conductor assembly, which may be twisted or parallel conductors; Outer covering - Extruded nylon in 5 mil min thickness, employing Recognized Component QMTT2 nylon for Gasoline Resistance.
		
			JacketPVC, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment where exposed to temperatures not exceeding 60 deg C in dry location and in liquid gasoline and gasoline vapor at ordinary ambient.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20463	Issued:1986-05-06
			Revised:2012-07-22


Rating	60 deg C, 125 Vac, Horizontal flame, Gasoline Resistant.

Conductor	28 AWG - 16 AWG solid or stranded round, tinned or bare copper.

Insulation	PE, 10 mils min average, 9 mils minimum at any point.

Shield	Optional - may be applied over the polyethylene covering or insulated conductors.

Covering	Inner covering - 15 mil min at any point of polyethylene covering extruded over the conductor assembly, which may be twisted or parallel conductors; Outer covering - Extruded nylon in 5 mil min thickness, employing Recognized Component QMTT2 nylon for Gasoline Resistance.

Jacket	PVC, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment where exposed to temperatures not exceeding 60 deg C in dry location and in liquid gasoline and gasoline vapor at ordinary ambient.