UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20464
                        
                            Issued:1986-06-06
                    
                            Revised:2022-05-06
                    
                            Style
                            20464
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60, 75, 80, 90, 105 deg C, 30, 90 150 Vac, Horizontal flame.
		
			Conductor40 AWG - 10 AWG solid or stranded.
		
			InsulationLabeled or complying with the manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated wires or groups or individually insulated wires forming a round, oval or flat cable. The length of lay of the twisted wires or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketPVC
		
			dia of cable under jacket
		
			0.350 inches or less*15 mils min average12 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			*Major dia. if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20464	Issued:1986-06-06
			Revised:2022-05-06


Rating	60, 75, 80, 90, 105 deg C, 30, 90 150 Vac, Horizontal flame.

Conductor	40 AWG - 10 AWG solid or stranded.

Insulation	Labeled or complying with the manufacturer's AWM Procedure.

Assembly	Two or more individually insulated wires or groups or individually insulated wires forming a round, oval or flat cable. The length of lay of the twisted wires or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	PVC
	dia of cable under jacket
	0.350 inches or less*	15 mils min average	12 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	*Major dia. if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.