UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20474
                        
                            Issued:1986-06-13
                    
                            Revised:2012-07-24
                    
                            Style
                            20474
                        
                            Multiple conductor with nonextruded insulation
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationPET, PETP, 1 mils min average, on each side of the conductors 1 mil minimum at any point of polyethylene terephthalate film bonded together with minimum 5 mil insulation width on outside edges of conductors and 5 mil minimum width between adjacent conductors.
		
			AssemblyTwo to twenty-five conductors
		
			ShieldOptional - drain wires may be employed and may be parallel to the insulated conductor.
		
			CoveringOn each side of the shield is a 1 mil min at any point, Polyethylene Terephthalate film.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20474	Issued:1986-06-13
			Revised:2012-07-24


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min, solid or stranded.

Insulation	PET, PETP, 1 mils min average, on each side of the conductors 1 mil minimum at any point of polyethylene terephthalate film bonded together with minimum 5 mil insulation width on outside edges of conductors and 5 mil minimum width between adjacent conductors.

Assembly	Two to twenty-five conductors

Shield	Optional - drain wires may be employed and may be parallel to the insulated conductor.

Covering	On each side of the shield is a 1 mil min at any point, Polyethylene Terephthalate film.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.