UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20475
                        
                            Issued:1986-06-12
                    
                            Revised:2019-11-07
                    
                            Style
                            20475
                        
                            Multiple conductor cable using non integral jacket.
                    
			Rating60 deg C, 300 Vac, Cable flame.
		
			Conductor40 AWG min - Material not specified.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.
		
			ShieldOptional - may be over one or more of the insulated conductors or applied over the assembly.
		
			JacketPUR
		
			dia of cable under jacket
		
			1.000 inches or less30 mils min average24 mils minimum at any point
		
			1.001-1.500 dia45 avg36 min
		
			1.501-2.500 dia60 avg48 min
		
			2.501-4.000 dia80 avg64 min
		
			4.001 dia and larger110 avg88 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or External Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20475	Issued:1986-06-12
			Revised:2019-11-07


Rating	60 deg C, 300 Vac, Cable flame.

Conductor	40 AWG min - Material not specified.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.

Shield	Optional - may be over one or more of the insulated conductors or applied over the assembly.

Jacket	PUR
	dia of cable under jacket
	1.000 inches or less	30 mils min average	24 mils minimum at any point
	1.001-1.500 dia	45 avg	36 min
	1.501-2.500 dia	60 avg	48 min
	2.501-4.000 dia	80 avg	64 min
	4.001 dia and larger	110 avg	88 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or External Wiring.