UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20476
                        
                            Issued:1986-06-13
                    
                            Revised:2012-07-29
                    
                            Style
                            20476
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200 deg C, 300 Vac, Horizontal flame.
		
			Conductor16 AWG solid or stranded round, tinned or bare. Conductive Core - Over the conductor is an extruded semiconductive high temperature thermoplastic.
		
			InsulationFEP, 13 mils min average, 12 mils minimum at any point.
		
			AssemblyTwo conductors laid parallel and is built with a conductive core, insulation, monitor wire (optional), shield (optional),and jacket (optional). Monitor Wire - Optional. Recognized AWM single conductor style, laid parallel to insulated cable.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketOptional - FEP, 13 mils min average, 10 mils minimum at any point of FEP over insulated cable and monitor wire assembly.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20476	Issued:1986-06-13
			Revised:2012-07-29


Rating	200 deg C, 300 Vac, Horizontal flame.

Conductor	16 AWG solid or stranded round, tinned or bare. Conductive Core - Over the conductor is an extruded semiconductive high temperature thermoplastic.

Insulation	FEP, 13 mils min average, 12 mils minimum at any point.

Assembly	Two conductors laid parallel and is built with a conductive core, insulation, monitor wire (optional), shield (optional),and jacket (optional). Monitor Wire - Optional. Recognized AWM single conductor style, laid parallel to insulated cable.

Shield	Optional.

Covering	Optional.

Jacket	Optional - FEP, 13 mils min average, 10 mils minimum at any point of FEP over insulated cable and monitor wire assembly.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.