UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20477
                        
                            Issued:1986-06-17
                    
                            Revised:2012-04-26
                    
                            Style
                            20477
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with this manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together. Barrier layer and/or fillers optional. Maximum diameter of conductor assembly is 1.0 inch. Maximum width of Cable is 10.0 inches.
		
			CoveringOptional - Extruded PVC, 5 mils min, may be extruded over the conductor assembly, or extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 8 mils min. average, 6 mils minimum at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Dia of cable under jacket in inchesMinimum average thickness milsMinimum thickness at any point mils
		
			0.700 inches or less3023
		
			0.701-1.0006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection in Class 2 circuits of electronic cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20477	Issued:1986-06-17
			Revised:2012-04-26


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with this manufacturer's AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together. Barrier layer and/or fillers optional. Maximum diameter of conductor assembly is 1.0 inch. Maximum width of Cable is 10.0 inches.

Covering	Optional - Extruded PVC, 5 mils min, may be extruded over the conductor assembly, or extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 8 mils min. average, 6 mils minimum at any point.

Shield	Optional.

Jacket	Extruded PVC
	Dia of cable under jacket in inches	Minimum average thickness mils	Minimum thickness at any point mils
	0.700 inches or less	30	23
	0.701-1.000	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection in Class 2 circuits of electronic cable.