UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20478
                        
                            Issued:1986-06-17
                    
                            Revised:2012-04-17
                    
                            Style
                            20478
                        
                            Multiple-conductor Parallel Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Twisted singles, with or without covering and shield, laid in parallel. Maximum diameter of conductor assembly is 1.0 inch. Maximum width of cable is 10.0 inches.
		
			ShieldOptional.
		
			CoveringOptional - extruded PVC, 5 mils minimum thickness; or extruded PTFE, PFA, FEP, or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point applied over the conductor assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches) before and after rippingMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 inches or less30 avg23 min
		
			0.701-1.00060 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20478	Issued:1986-06-17
			Revised:2012-04-17


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulated Conductor	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Twisted singles, with or without covering and shield, laid in parallel. Maximum diameter of conductor assembly is 1.0 inch. Maximum width of cable is 10.0 inches.

Shield	Optional.

Covering	Optional - extruded PVC, 5 mils minimum thickness; or extruded PTFE, PFA, FEP, or ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point applied over the conductor assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches) before and after ripping	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 inches or less	30 avg	23 min
	0.701-1.000	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection in Class 2 circuits of electronic equipment.