UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20479
                        
                            Issued:1986-06-17
                    
                            Revised:2012-04-23
                    
                            Style
                            20479
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles, groups of insulated singles twisted together or laid parallel. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG sizes. Maximum diameter of conductor assembly is 1.000 inch.  Maximum width of cable is 10.0 inches.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 5 mils minimum thickness at any point, PVC covering may be extruded over the conductor assembly, or extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20479	Issued:1986-06-17
			Revised:2012-04-23


Rating	80 deg C, 300 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated singles, groups of insulated singles twisted together or laid parallel. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG sizes. Maximum diameter of conductor assembly is 1.000 inch. Maximum width of cable is 10.0 inches.

Shield	Optional.

Covering	Optional - Extruded PVC, 5 mils minimum thickness at any point, PVC covering may be extruded over the conductor assembly, or extruded PTFE, extruded PFA, extruded FEP or extruded ETFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.